ODA MX Series, Руководство пользователя, Страница: 68 / 92

5-9. ADC SAMPLING
▌Be able to set the output voltage/current measuring speed and displaying speed
▌If the frequency is lower, data acquisition is reduced. But you can get the more accurate value.
▌If the frequency is higher, data acquisition is increased. But voltage/current measuring value
can be changeable frequently in the display.
▌In case of PC interface control, recommends ADC sampling speed is 20~50Hz
▌In case of Front-panel control, recommends ADC sampling speed is 5~20Hz.
▌CAUTION : If you have to acquire the voltage/current in high speed100Hz, 300Hz, use 1.3KHz speed!!
▌Function
> 5Hz
200ms 마다 전압 또는 전류값을 측정합니다.
Measures voltage/current at every 200ms
> 20Hz
50ms 마다 전압 또는 전류값을 측정합니다. (공장Default값)
Measures voltage/current at every 50ms.(Instrument default value)
> 50Hz 20ms 마다 전압 또는 전류값을 측정합니다. Measures voltage/current at every 20ms.
> 100Hz 10ms 마다 전압 또는 전류값을 측정합니다. Measures voltage/current at every 10ms.
> 300Hz
3.3ms 마다 전압 또는 전류값을 측정합니다.
Measures voltage/current at every 3.3ms.
> 1.3KHz
770us 마다 전압 또는 전류값을 측정합니다.
Measures voltage/current at every 770us.
ADC SAMPLING Operating
▌Power switch on in a pressing "FACTORY" key.
▌When appearing "1. user-mem clear" message, release "FACTORY" key.
▌Enter to "7. adc sampling" mode by using cursor key
▌In order to set, press the "FACTORY" key one more time.
LCD Display
▌ Set the "50Hz" mode by using cursor key.
LCD Display
▌To finish the "ADC SAMPLING" mode, press the "FACTORY" key one more time
LCD Display
≫ Related Remote Interface Command
FACT:ADC {5|20|50|100|300|1300}
FACT:ADC?
Return Value(5Hz, 20Hz, 50Hz, 100Hz, 300Hz, 1.3KHz)
Apply: FACT:ADC 100 Set 100Hz speed in other to acquire the data.
FACT:ADC? Return value : 100Hz Confirm the ADC sampling speed : 100Hz.
Hold press
Release
- 64 -
▌Power switch ON
20hz
50hz
done