SAVE
You can save present status of load in 『User Memory』. 『User Memory』 is divided into 10 and
Mode status, Range, Voltage, Current, Resistance and Watt value will be saved in 『User Memory』
Below is the process of saving data in 『User Memory』.
SAVE
▌Power On
▌INPUT is OFF (ON icon is off)
▌To save present status in 『User Memory』,
press SAVE/RECALL & V_SENSING KEY at the same time.
▌SAVE menu setting
Move to SAVE menu by using left/right key.
When in SAVE menu, "1.SAVE MODE" is displayed on 2nd line.
※SAVE/RECALL menu order: 1.SAVE MODE ↔ 2.RECAL MODE
▌Enter SAVE mode menu
Press SAVE/RECALL, V_SENSING KEY to enter SAVE Mode Menu
▌Set SAVE address number
▌Select address number between 1~10 by using encorder switch.
▌Press SAVE/RECALL, V_SENSING KEY to save to the selected address.
▌After "SAVE. . ." is displayed, will be returned to the previous state.
≫ Related Remote Interface Command
*SAV {1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10}
Application 1:
*SAV 4
Save present status in address number 4 of『User Memory』
You can initialize『User Memory』. Please refer to "5-3. USER-MEM CLEAR".
- 56 -
3-13.SAVE/RECALL
Note
POWER
SAVE/RECALL
V_SENSING
SAVE/RECALL
V_SENSING
SAVE/RECALL
V_SENSING