CR MODE INPUT ON
▌To enable CR MODE ON, press INPUT ON/OFF Key
If INPUT is on, ON icon will light up.
≫ Related Remote Interface Command
INPUT {OFF|ON}
INPUT?
When CR MODE is ON, how to change LCD display
▌Check if CR MODE is on
CR icon and ON icon light on.
▌Press DISPLAY KEY and you can check various information,
when CR MODE is on
※DISPLAY change R-SET → WATT → MODE TIME → R-SET
When CR mode is on, how to change resistance
▌Check R-SET setting
When CR & ON icon light on and "R-SET" is displayed on the 2nd line LCD
▌To set resistance, move cursor to the value you want to change
by using left/right cursor key.
Control encorder switch to change your resistance value
※ If "R-SET SET-ERR" is displayed on LCD, you can't set the resistance value
with your present source on your DC electronic load.
≫ Related Remote Interface Command
RES {VALUE}
RES?
- 21 -
INPUT
ON/OFF
DISPLAY