To set up CYCLING mode, proceed as follows.
MODE SET
▌Power ON
▌Move to Cycling mode menu
Press Cycling setting key.
When entering setting menu of Cycling mode,
">CYC SET" is displayed on 1st line of LCD.
CYC icon will light up.
Cycling FINISH STEP SET
▌When in Cycling mode setting menu,
CYC icon lights up and On icon lights off
▌Setting Cycling Finish Step menu
Move to Finish Step menu by using left/right key
When in Finish Step, "1. FINISH_STEP" is displayed on 2nd line of LCD
※Cycling setting munu order: 1.FINISH_STEP ↔ 2.REPEAT_NUM ↔
3.MODE ↔ 4.VALUE STEP: ↔ 5.DELAY STEP:
▌Entering Finish Step menu
Press Cycling setting key to enter Finish Step menu.
▌To set Finish Step value, move cursor using right/left key
to the value you want to change.
And adjust the encorder switch to change value.
▌Saving Finish Step value
Press Cycling setting key.
After saving Finish Step value,
exit Finish Step menu and return to Cycling setting menu.
≫ Related Remote Interface Command
CYC:SEQ{VALUE}
CYC:SEQ?
3-8.CYC MODE
- 35 -
CYCLING
SETTING
POWER
CYCLING
SETTING
CYCLING
SETTING