ODA LF Series, Руководство пользователя, Страница: 32 / 116

To set up CP mode, proceed as follows.
MODE SET
▌Power ON
▌Move to MODE menu
Press MODE Key to enter MODE menu
When entering MODE menu, ">MODE SET" is displayed on 1st line of LCD
▌MODE setting
Set CP MODE by using left/right key
When CP MODE is on, "4. CP MODE" is displayed on 2nd line of LCD
※MODE change order: CC ↔ CV ↔ CR ↔ CP ↔ ON/OFF ↔ FUSE ↔ BAT
▌Saving MODE & Exit MODE menu
Press MODE key to save MODE and exit MODE menu.
After "SAVE…" is displayed on the 2nd line of LCD
present voltage and current shows on the 1st line
"P-SET" will show on the 2nd line of LCD.
≫ Related Remote Interface Command
MODE:{CC | CV | CR |CP |ONOFF | FUSE | BAT }
MODE? 0:CC, 1:CV, 2:CR, 3:CP, 4:ON/OFF, 5:FUSE, 6:BAT
When CP mode is OFF, how to change watt
▌Check CP mode setting
When CP icon lights on and "P-SET" is displayed on the 2nd line LCD
▌To set resistance, move cursor to the value you want to change
by using left/right cursor key.
Control encorder switch to change your watt value
≫ Related Remote Interface Command
WATT {VALUE}
WATT?
3-4. CP MODE
- 23 -
MODE
POWER
MODE