OCULUS 68100, Инструкция по эксплуатации

Страница: 53 / 98

13 Chronology of Different Mea s uring Proce ss e s
Instruction Manual Myopia Master® (G/68100/EN Rev04 0820) 47 / 92
13 Chronology of Different Mea s uring Proce ss e s
The chronology of three different measuring processes is outlined briefly
below.
1 You enter a patient in the patient data management and then con-
duct the measurement.
The examination data are automatically saved under the newly
entered patient’s name
(sec. 13.1, page 47) .
2 You start directly with the measuring operation and then subse-
quently save the examination under an existing patient’s name. Al-
ternatively, you can also enter a new patient after performing the
measuring operation
(sec. 13.2, page 48) .
3 You perform a measuring operation without saving the examination
under a patient’s name
(sec. 13.3, page 49) .
13.1 Enter P Mea s ure

Press the button [Patient] in the patient data management.

Create a new patient, as described in sec. 11.1, page 23 .
The newly entered patient appears in the list of patients and is
highlighted in blue.

Start the measuring operation by pressing the [Measure] button.
Press the optional joystick button.

Conduct the measurement (sec. 12, page 28) .
When the measuring operation has been completed, the overview
screen appears
(fig. 12-5, page 32) .
The conducted examinations are automatically saved in the patient
data management.
The saved examinations can be viewed again at any time (sec. 12.8,
page 44) .