Octagon PC-500, Руководство пользователя

Страница: 168 / 233

22-17
PC-500 user’s manual CPU power management
When the /P option is used with the /SHOWALL, the display pauses be-
tween each displayed page of information.
When the /? option is used, all other options are ignored and a “help display”
is presented to the user. A <CR> keystroke between each page is necessary
to continue to the next page of help.
If an error occurs during parsing, the line in question will be displayed and
an ERRORLEVEL returned. For example:
>> Parameter out of range error. Line follows:
hdd-to=50
The correct range is 0-31 minutes
or
>> Unknown keyword error in input file line 7. Line fol-
lows:
standbuy-delay=10
Standby was spelled incorrectly.
The following ERRORLEVELs will be returned:
0 — No errors occurred.
1 — Unable to save to serial EEPROM.
2 — Configuration file not found.
3 — Parsing error or out of range error.
In PMISETUP, the following options are available and can be included in a
.PMI file which is loaded by PMISETUP.EXE. PMISETUP.EXE is located
in the \UTILS directory:
The following are the keywords which are used. To disable options, either
an “N” or “0” is used, depending on the option.
pmi-enable=Y/N Disables/enables the power management code
fdd-to=xx Sets the on-card (LPT1) floppy disk drive time-out
value (x=0-31 minutes)
hdd-to=xx Sets the hard drive time-out value (x=0-31 minutes)
COM1-to=xx Sets the COM1 time-out value (x=0-31 minutes)
COM2-to=xx Sets the COM2 time-out value (x=0-31 minutes)
doze-delay=x Sets DOZE time-out before STANDBY (x=0,2,8 seconds)
standby-delay=xx Sets delay time before STANDBY (x=0-31 minutes)
suspend-delay=xx Sets delay time before SUSPEND (x=0-31 minutes)
irq0-reset-doze=Y/N Enables reset of DOZE clock if IRQ0 occurs
irq3-reset-doze=Y/N Enables reset of DOZE clock if IRQ3 occurs
irq4-reset-doze=Y/N Enables reset of DOZE clock if IRQ4 occurs
irq5-reset-doze=Y/N Enables reset of DOZE clock if IRQ5 occurs
irq7-reset-doze=Y/N Enables reset of DOZE clock if IRQ7 occurs