DIAM4200 ©2018 AUGIER SA.
6021642 DIAM4200 5 to 20KVA rev 1-8.docx
II-43
II.2.2.9 FAA Multiwire remote control with 120Vac control supply
II.2.2.10 FAA Multiwire remote control with EXTERNAL 120Vac control supply
When delivered, the CCR is configured in factory as :
-
“External” power supply,
see:
Wiring remote control voltage configuration
- a small daughter board is plugged on J1 of the FAA remote control board
-
“ON order”
see:
Operating modes for multiwire (FAA & IEC) remote control :
- Default brightness B1 (2.8A)
- 1, 3 or 5 brightness, as ordered and indicated in the part number (see at the end
The 34-pin terminal blocks making up the inputs and outputs for remote control are situated at the back of
the CCR.
II.2.2.10.1 Inputs (120Vac only) :
Terminal
T.Bloc
Function
FAA label
Pin Type
1
T1
B1 control
B1
Input voltage with respect to C
2
T1
B2 control
B2
Input voltage with respect to C
3
T1
B3 control
B3
Input voltage with respect to C
4
T1
B4 control
B4
Input voltage with respect to C
5
T1
B5 control
B5
Input voltage with respect to C
6
T1
“ON” control
CC
Input voltage with respect to C
7
T1
Not used (*)
8
T1
Not used (*)
9
T1
Not used (*)
10
T1
Not used (*)
11
T1
Not used (*)
12
T1
Not used (*)
13
T1
Not used (*)
14
T1
C
CCI
Common to Pin1 to Pin 6 inputs
