EXPLORE
E6 & E7
.
2021 INSTALL & OPERATION MANUAL
26
EXPLORE SERIES
PROBLEM
CHECK
CAUSE
FIX
Light does not light
up
Check that the electrical connections
between the light and the supply cable have
been made correctly
Poor electrical
connection
Remake connection and seal
joint correctly
Check the cable gauge is sufficient for the
current draw of the light
Cable gauge
insufficient
resulting in voltage
drop
Increase cable gauge
Check that the wiring polarity is correct, red
to positive and black to negative
Polarity incorrect
Change the wiring polarity
and seal joint correctly.
Damage to light may have
occurred.
Check that there is power supply to the light
cable connection
Poor electrical
connection
Trace the cables back,
checking at joints until break
has been located. Then
rectify the problem and seal
joint correctly
Check that the electrical connections
between the supply cable and the light
circuit breaker or fuse have been made
correctly
Poor electrical
connection
Remake connection and seal
joint correctly
Check that the in-line fuse is intact and not
blown
Replace fuse
If fuse keeps blowing, then
there is a short circuit in the
light system that must be
traced and rectified. If no
external short can be located
contact your dealer
Exchange the power cable (between light
and power supply) with one from a working
light
Light works, faulty
cable
Contact your dealer for a
replacement cable
Check that the light supply circuit breaker is
closed, or the fuse has not blown
Close circuit
breaker
/ replace fuse
If breaker / fuse keeps
blowing, then there is a
short circuit in the light
system that must be traced
and rectified. If no external
short can be located
contact your dealer
