EXPLORE
E6 & E7
.
2021 INSTALL & OPERATION MANUAL
22
7. Twist the tool to engage the screw heads. Once the screw heads are engaged twist and pull the tool outwards
to extract the light.
5.5 LIGHT CARTRIDGE INSTALLATION
Additional Tools required not supplied by OceanLED:
•
Allen Key (2mm)
Before installing the light cartridge, clean the inside of the mounting tube with isopropyl alcohol cleaner and
let it dry. Failure to do this may introduce potential contaminants that may damage the product.
Lubricant substances of any kind MUST NEVER be used to ease the insertion of the light cartridge into the
mounting tube. Should any help to insert the light cartridge be needed OceanLED recommend the use of a
small quantity of Isopropyl Alcohol sprayed onto the O-Ring on the back of the light cartridge.
1. Inspect the mounting tube and light cartridge to ensure no contaminant (grease, debris, dirt), and/or water are
present.
2. Using the 2mm Allen key, remove one of the screws on the back of the light cartridge to act as a breather.
Failure to do so will make the installation process significantly harder.
3. Align the light cartridge with the mounting tube - ensure that the LED Indicator is at the top and central on the
back of the light cartridge or aligned as per OceanLED custom alignment instructions.
4. Push the light cartridge in slowly until it bottoms against the front bezel.
Engaged
