Oce WP28, Руководство по эксплуатации

Страница: 12 / 227

xi
USB (Universal Serial Bus) Interface
This printer supports Full-Speed USB 2.0 standards. Connection to a
computer with a USB interface gives a higher communication speed than
parallel interface connection.
e-MPS
‘e-MPS’ is an abbreviation for ‘enhanced-Multiple Printing System,’ which
is a post-processing function that combines electronic sorting, job
retention, and virtual mailboxing.
When printing multiple copies of a document, the data is transferred from
the computer to the printer only for the first copy; the data is then stored
on the printer’s hard disk. Copies of the document are printed using the
stored data.
Printing is performed faster with less computer spooling time and less
network traffic.
Furthermore, printed data that is stored on the hard disk can be called up
using job retention functions, such as Quick Copy etc., allowing you to
quickly print additional copies of a document from the printer at any time,
without needing to re-spool the document or start up the computer system.
Printer control language PRESCRIBE
The printer uses PRESCRIBE, Kyocera Mita’s page printer control
language with enhanced color graphics capabilities. The simple commands
of PRESCRIBE allow the programmers to easily define pagination and
device control.
KPDL3 (Kyocera Printer Description Language 3)
KPDL3 is the Kyocera’s implementation of the PostScript page description
language Level 3. The printer has 80 fonts that are compatible with Adobe
PostScript fonts. (The printer also has 80 PCL fonts.)
PDF direct printing
Allows you to send a selected PDF file directly to the printer without
invoking a printer driver.
Account management system
The account management system function records the number of pages
printed by each department. The administrator can preset the maximum
number of pages that each department will be allowed to print.