Oce sx1481, Руководство пользователя

Страница: 69 / 192

4-5 s
endInG faxes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
s
end
In
G
f
axes
Real-time transmission (non memory transmission)
Your machine will simply dial the other fax and when it makes contact, your machine
will feed the document through, scanning and transmitting real-time.
• With real-time transmission, you can watch each page as it is scanned and sent.
To perform a real-time transmission:
1
Switch to the fax mode by pressing <
copy
4
fax
4
scan
>.
2
Place the document on the ADF.
3
Obtain a dial tone, either by:
• Pressing the “Monitor” soft key.
–or–
• Lift the handset if you have connected an external telephone to your machine.
In either case, the machine shows:
** Tel Mode **
_
– or –
• Press <Advanced Functions> repeatedly until “Memory Tx” appears and press
<Enter>. Then select “Off” and press <Enter> to turn off the memory transmis-
sion.
– or –
• If you assigned “Memory Tx” to a soft key (see page 8-2), turn off the memory
transmission by simply pressing that key.
NOTE: “Monitor” is assigned to a soft key as default.
4
Dial the fax number.
• Use the numeric keys to dial the number.
–or–
• Press a one-touch key (see page 3-6).
–or–
• Press <Speed Dial /Group> and three-digit code (see page 3-8).
–or–
• Use the phone directory dialing (see page 3-11).
NOTE: With real-time transmission, only one destination can be dialed.
5
When you hear fax tones from the remote unit, press <Start>.
If a person answers the phone, use the handset to tell that person that you are trying
to send a fax. When you hear fax tones, press <Start>.
If the call fails and you used “Monitor” to dial, press the <Monitor> soft key to hang up.
If you are using the handset, hang up after pressing <Start>.
NOTE: To cancel the transmission, use review commands features (page 4-7).