Oce sx1481 Скачать руководство пользователя страница 104

Страница: 104 / 192

6-4

sInG

code

features

Use the numeric keys to enter the ITU-T-compatible password for this box. This pass-

word can be up to 20 digits including “ ” and “ ”.

To change a number, press <

> or <

> to move the cursor and press <Cancel> to

erase it. Then re-enter the number correctly.

Press <Enter>.

Box Type :Bulletin





/Enter

Press <

> or <

> to select the box type, then press <Enter>.

    If you chose “Bulletin”,  go on to step 11.
    If you chose “Relay”, skip to step 13.
    If you chose “Security”, skip to step 19.

If you setup a Bulletin box:

The bulletin box has the following settings:

• Rx Protect — Determines whether or not the document is received in the bulletin box.

Rx Protect :Off





/Enter

“On”

(Rx protection is on): Documents are not received in the box.

“Off”

(Rx protection is off): Document are received in the bulletin box and you can

set the two additional settings — “Auto print” and “Over-

write Doc.” below.

Press <

> or <

> to select “On” or “Off”, then press <Enter>.

Go on to the next one.

• Auto Print — Determines whether to print a received document.
This setting appears only when the “Rx protect” is set to “Off”.

Auto Print :Off





/Enter

“On”: A document will be printed automatically when it is received in the bulletin box.
“Off”: Received documents are not printed. You will have to print them manually

(see page 6-9).

Press <

> or <

> to select “On” or “Off”, then press <Enter>.

Go on to the next one.

• Overwrite Doc — Determines whether to overwrite existing (erase) the documents

when the box receives a new one.

This setting appears only when the “Rx protect” is set to “Off”.

Overwrite Doc. :Off





/Enter

“On”: The currently stored documents in the box will be replaced with a new

received document.

“Off”: A received document will be added in the box. Up to 30 documents (each docu-

ment can include one or more pages) can be stored in each box.

Press <

> or <

> to select “On” or “Off”, then press <Enter>.

Go on to the next one.

Содержание sx1481

































































































































































































Результаты поиска

Содержание sx1481

Отзывы:

Похожие инструкции для sx1481

Бренды по названию

Популярные бренды

Oce sx1481, Руководство пользователя

Результаты поиска

Содержание sx1481

Отзывы:

Похожие инструкции для sx1481

Бренды по названию

Популярные бренды