Oce CS9090, Руководство пользователя

Страница: 47 / 177

Chapter 4: Preparing for a job
AP-75036 - Revision 1.3 – 20/03/06 47 User’s Guide CS9000 series
4.5 INSTALLING OCÉ IJC910 LOW SOLVENT INK FOR THE
FIRST TIME
Read these cautions first, before powering on the printer and installing ink cassettes for the first time.
Caution
•
When handling Océ IJC910 Low Solvent ink, be careful that ink does not get into your eyes or
on your skin.
•
When ink has become in contact with your eyes, immediately flush with water
•
When ink has become in contact with your skin, immediately wash your skin with soap.
•
If you feel discomfort after a contact with the ink, consult a doctor immediately.
•
Do not disassemble ink cassettes, ink may get into your eyes or on your skin.
•
Only use Océ IJC910 Low Solvent ink and appropriate Low Solvent Cleaning Liquid.
Caution
•
Before powering ON the unit, make sure to:
ƒ
Remove the dummy cassettes
ƒ
Remove the waste tube clamps
ƒ
Remove the bag enclosing the waste tubes
ƒ
Connect the waste tubes
ƒ
Verify you have all ink and cleaning cassettes needed. Refer to “parts needed” below.
Caution
When powering ON the unit for the first time, a cleaning cycle automatically starts. Please follow
the instructions mentioned on the display.
Caution
•
Do not leave the ink cassettes unpacked and uninstalled. This will cause poor print quality.
•
Immediately install ink cassettes after unpacking them, to prevent incorrect printing or poor
print results
Parts needed:
Before powering ON the unit for the first time, please be sure to have:
•
8 cassettes with Low Solvent Setup Cleaning
•
8 cassettes with Low Solvent Cleaning Liquid
•
8 cassettes with Océ IJC910 Low Solvent ink (2 x CMYK)