Oce CS9090, Руководство пользователя

Страница: 42 / 177

Chapter 4: Preparing for a job
AP-75036 - Revision 1.3 – 20/03/06 42 User’s Guide CS9000 series
4.1 INTRODUCTION
The procedures needed before using the printer are explained below.
4.2 CONNECTING THE POWER CABLE
The connection procedure for the power cable is explained below.
Important
•
Make sure that the distributed power cable is used. Use of a different cable may result in
electric shock or fire.
•
Do not use a damaged power cable. Doing so may result in electric shock or fire.
•
The disconnect device is the plug on the power supply cord.
Caution
•
Be careful of the following when handling the power cable.
o
Do not make any modifications to the power cable.
o
Do not place anything heavy on the power cable.
o
Do not bend, twist, or pull the cable.
o
Do not wire the cable near equipment that generates heat.
Notes
•
If the power cable is damaged, contact one of the following :
o
The shop where you bought your Océ printer.
o
Your local Océ representative.
To connect the power cable, follow the steps below.
Step 1 :
Make sure the printer is powered OFF.
Notes
When the printer is ON, the power LED is lid green. Push the power button again to turn off the machine.