Oce ColorWave 300, Руководство пользователя

Страница: 249 / 356

Solutions Method of analy-
sis Problem
■
Use the 'Presentation' quality
mode
‘Output type, output quality and
print speed’ on page 211
■
Use the 'Optimize print quality' wiz-
ard to correct the problem
‘Use the
'Print quality' wizard’ on page 252 .
'Quality check'
print White stripes in
filled areas
■
Make sure you define the correct soft-
ware settings, for example the correct
pen settings.
■
Use the 'Presentation' quality mode
'Quality check'
print The output color is
not the same as the
original color
■
Make sure you defined the correct
scale settings
■
Use the 'Presentation' quality mode
■
Use the 'Optimize print quality' wiz-
ard to correct the problem.
■
In case of a media length deviation,
adjust the 'Cut length correction' in
the Océ Express WebTools.
■
In case of a image length deviation,
set the 'Size accuracy' to 'Size accuracy'
and adjust the image length correction
in the Océ Express WebTools.
'Quality check'
print The length and
width measure-
ments are different
from the original
■
Use the 'Presentation' quality mode
■
Use the 'Optimize print quality' wiz-
ard to correct the problem.
■
When failing printheads cause this
problem, use the 'Replace printhead'
wizard to replace the failing printheads
‘Replace a defective printhead’ on page
264 .
'Quality check'
print The colored lines
are not well aligned
or blurred
■
Use the 'Presentation' quality mode
■
Use the 'Optimize print quality' wiz-
ard to correct the problem.
■
When failing printheads cause this
problem, use the 'Replace printhead'
wizard to replace the failing print-
heads.
'Quality check'
print Missing sections in
lines or stepped
lines
Chapter 6 - Ensure the best output quality 249
Optimize the output quality on the printer