Oce Arizona T220, Руководство пользователя

Страница: 70 / 79

Daily Maintenance |
3/10/03 6-59
6.2
Daily Maintenance
Removing Ink From the Table
Use appropriate safety equipment — butyl gloves, eye protectors, and respirator.
There are two possible methods for removing ink from the table:
Method 1 - Solvent
Use a poly-wipe cloth (0505-0283) and CGS 80 solvent (3000-0057)
1. Moisten the cloth with solvent and wipe all areas of the table that are
contaminated with ink.
2. Let the solvent soak into the ink (about 2 minutes) then wipe again with
the cloth until all the ink is removed.
Let the table dry before placing new media.
Method 2 - Lacquer thinner
Use a poly-wipe cloth and commercially available lacquer thinner.
1. Moisten the cloth sparingly with lacquer thinner and wipe all areas of the
table that are contaminated with ink.
2. Wipe immediately since lacquer thinner evaporates quickly (no soaking is
necessary).
Caution:
Using a cloth other than the suggested poly-wipe may result in
parts of the cloth separating as it is wiped across the vacuum holes.
Any of this debris may then be picked up by the print heads and
cause nozzle dropout.