Oce Arizona T220, Руководство пользователя

Страница: 23 / 79

Changing an Ink Bottle |
3/10/03 2-13
2.3.2
Emptying the Waste Bottle
The printer accumulates waste that is made up of ink and solvent. The waste bottle is
located in the right side of the gantry beneath the capping station. A sensor monitors the
waste level in the bottle, and a high level is reported on the control panel.
Figure 4 Gantry Doors Open Showing Waste Bottle
The waste bottle should be emptied when the control panel indicates that the waste bottle
is almost full. To empty the waste bottle:
1. Remove the drainage tube from the lid of the waste bottle;
2. Remove the waste bottle from the bracket and pour the waste into a suitable
container for disposal. Dispose of waste in accordance with local laws or as directed
in the MSDS sheets — See “Safety Information” on page 4.
3. Replace the empty container by fitting it into the bracket;
4. Ensure that the lid is securely screwed on to the waste bottle and finally re-insert the
drainage tube.
Note: If you need to replace the waste bottle container with a new one, or if you
require a spare bottle, order part # 3010100266.