Oce Arizona T220, Руководство пользователя

Страница: 31 / 79

Handling Media |
3/10/03 3-21
Figure 11 Sharp edge of the strip butts up against the media.
In Figure 11 note that the sharp edge of the media holder strip butts up against the middle
of the media. This prevents the media from warping.
• The strips can be printed on if a bleed is required in the image. If the strips
are used for a bleed and the media thickness is more than 2mm greater than
the strips, overspray and nozzle dropout is likely to occur.
• To clean the strips follow the same procedure as for cleaning the table,
using either CGS80 or laquer thinner — See “Removing Ink From the
Table” on page 59.
• When not in use the strips should be stored flat.