Oce Arizona 365 GT, Руководство пользователя

Страница: 59 / 234

That special print is now available in the Active job list of the Print Job Control module.
How to Print a Special Print
Go to the Print Job Control module to actually print the special print. It will appear in the active
job list and is printed like any other print job.
NOTE
Refer to the sections that document the special prints for details on printing. For example, the
Nozzle check and the Ship print are printed on I/O paper, while the Ruler Guide Print is printed
directly on the table. Note that some of the special prints are meant for service technicians only
and are not for use by the printer operator.
The Ink Flush Procedure
The Ink Flush Procedure is used when the printer is switched from one type of ink to another that
is not compatible with the first ink. It requires a special ink flush kit and will not work without it. If
you attach a new bag of ink that is not compatible, or for any other reason an ink flush is
required, you will see the Ink Status screen with a message that directs you to the Ink Flush
Procedure.
NOTE
Contact your local service representative for information about the ink flush kit that is required
for the flush procedure. Only inks certified by Océ can be used with your printer.
Spit Catcher Alignment Procedure
A Spit Catcher is necessary for all printers with the white ink option installed or for any printer
that uses the Océ ICJ256 inks. The Spit Catcher consists of a slotted cover for the Maintenance
Station drawer and a foam pad that is held in place under the drawer. Both the white ink and all
of the IJC256 inks need to "spit" periodically to help keep the printhead nozzles clear of debris.
The Alignment Procedure is needed when the Spit Catcher is first installed or if for some reason
the park position of the carriage changes. The purpose of the alignment is to have the carriage
parked directly over the slots in the spit catcher so that the ink that is spit falls though the slots
and is soaked up by the foam pad below. If you see a buildup of ink on the surface of the spit
catcher it may mean you need to follow the alignment procedure.
NOTE
The foam pad must be changed if it becomes too saturated with ink. It is a commercial item so
see your local representative for replacements.
System Logs
The System Logs are raw data log files for service diagnostics and troubleshooting purposes.
They are meant for service technicians only. Generate system logs only when requested by an
Océ service technician and follow the instructions they provide for retrieval of the files.
NOTE
When System Logs are generated, any previously saved log files are deleted. Therefore, do not
generate a second batch if you have just recently generated log files (unless requested to do so
by a service technician).
Tools and Utilities Module
Chapter 4 - How to Navigate the User Interface 59