Oce Arizona 365 GT, Руководство пользователя

Страница: 49 / 234

When an image is out of bounds in the bleed region, that area of the table preview is marked in
yellow.
Roll media print jobs will display only the middle part of the image if it does not fit in the window.
They can't be repositioned by dragging in the window.
8) Inactive Print Job List
Inactive job list consists of a table and job count summary on top. A job count summary displays
total number of inactive jobs. The list can be sorted by clicking on the appropriate column header.
The icons in the first column reflect the job type and status and can be use to sort the list. The
size column is sorted by image area. Date column is sorted by a compound value of date and
time. The inactive job list has the following features:
• The operator can drag and drop jobs to move them between the active and inactive job lists.
• Jobs deleted from the inactive list are deleted from the hard drive.
• The operator can automatically set the status of a job to Hold when the job is put in this queue.
This can be set separately for flatbed and roll media jobs.
9) Job information and parameters panel
The job information area displays only relevant job parameters of the current print job. For
example, the Overprints field is not displayed for roll media jobs. Some of the parameters may be
modified.
Offsets
A job's vertical and horizontal offset parameters can be changed
with the mouse wheel when mouse cursor is positioned over the
field. Rotate the mouse wheel up or down increments or decrements
offset at the rate of one unit per notch. Hold the right mouse button
and rotate the wheel increments or decrements at the rate of 10
units per notch. An alternate method to change parameter values is
to click on the field and this brings up an onscreen keyboard so you
can click on the numbers required. You can also use Preview to drag
an image to the desired position.
4
Print Job Control Module
Chapter 4 - How to Navigate the User Interface 49