OBO Bettermann isCon BA 45 SW, Инструкции системы

Страница: 41 / 68

System instructions OBO isCon
®
EN | 41
Installing the isCon® system
• Fasten the potential connection clip (type 927 2 6-K) to the air-termin-
ation rod.
Figure 43: Fastening the potential connection clip to the air-termination rod
Next steps:
– “„5.3 Fastening the air-termination rod in the air-termination rod stand“
on page 42 or “„5.4 Fastening the air-termination rod to pipes, a wall
or T support“ on page 47
– “„5.5 Routing the isCon® conductor“ on page 48
– “„5.6 Attaching the potential connection“ on page 49