OBO Bettermann isCon BA 45 SW, Инструкции системы

Страница: 30 / 68

OBO Bettermann 30 | EN
Installing the isCon® system
5 2 Mounting the isCon
®
connect connection elements
Using the screw-on connection element isCon
®
connect, you can con-
nect OBO isCon
®
conductors to forwarding systems, e.g. to the insulated
OBO isFang air-termination rod system or to a separate ring conductor or
earthing system using a connection terminal. At the same time, an elec-
trical connection is created between the copper core and the black, weak-
ly conductive external jacket of the isCon
®
conductor. The grub screws in
the connection elements are pre-coated with a reactive screw lock made
of two components. The components of the coating react automatically
on turning in and stick down the grub screws. If the screws are released
once more, the components are separated again and the grub screws
are locked again the next time they are screwed in. The screw lock is fully
hardened after six hours.
Scope of delivery (per packaging unit): 2 connection elements, 2 heat-
shrinkable sleeves, Allen key.
• Remove the two pin screws from the connection element using the
Allen key.
Figure 21: Removing the grub screws
• Free the front area of the black jacket from impurities and grease (e.g.
OBO Art. No. 5408 060).
isCon EPPA 004
Figure 22: Using a cleaning cloth
• Using a fork wrench (WAF 19 mm), screw the connection element onto
the isCon
®
conductor, until the copper core can be seen completely in
the two screw holes.