OBO Bettermann isCon BA 45 SW, Инструкции системы

Страница: 31 / 68

System instructions OBO isCon
®
EN | 31
Installing the isCon® system
19 mm
isCon
Figure 23:
Screwing on the connection element
• Tighten both grub screws with approx. 10 Nm.
10 Nm
Figure 24: Tightening the grub screws
• Pull the heat-shrinkable sleeve on in such a way that the connection
element and cable transition are enclosed completely. Using a gas
torch or hot air at approx. 120 °C, shrink the heat-shrinkable sleeve
and let it cool.
110-130 °C
1.
2.
Figure 25: Shrinking the heat-shrinkable sleeve
Note! The yellow, reactive screw lock of the grub screws in the
connection element requires approx. 6 hours to harden fully. Only
when the screw lock has fully hardened is an increased
releasing torque required to release the screws again.