Objet Objet30, Руководство пользователя

Страница: 94 / 142

Operating & Maintaining the Objet30 3-D Printer
7–14
DOC-24000 Rev. C
10. When prompted, load the new cartridge(s) and close the drawer.
Confirm this in the wizard screen and click
Next
.
After identifying the new cartridge(s), the Objet30 printer begins filling
the print heads with the new model material.
Figure 7-16: Material replacement: filling heads with new material
11. When the final wizard screen appears, make sure that the screen
displays the newly ‐ loaded material(s). Click
Done
to close the wizard.
The printer ‐ control interface is automatically updated, and should
display the new materials. The Objet Studio interface (on the printer ‐
server workstation) is also updated, and displays the new materials.
CAUTION : Dispose of all material cartridges in accordance with all
applicable laws and regulations. If necessary, the cartridges can be
disassembled for recycling. If this is done, protect the person handling
the cartridges from direct exposure to uncured resins.