1.9 Memory expansion
To expand the memory of your O
2
Xda Stealth,
you can insert a Mini SD card into the card slot
located at the right side of the phone. Make sure
the card is inserted correctly.
1.10 Data backup
Your O
2
Xda Stealth suppor ts 6 4MB R AM
capacity; however, you may need to back up
data and any new programs that you install in
the RAM to guard against data loss. To back up
your
Contact
,
Calendar
, etc., please set up the
synchronization partnership with your PC and
connect the phone with PC. ActiveSync will start
automatically.
1.11 Power management
To power on your O
2
Xda Stealth
While the phone is powered off, press
Power
key on the top of the phone to power it on.
To power off your O
2
Xda Stealth
While the power is on, press and hold
Power
key on the top of the phone for about 3 seconds
to turn off the device.
To reduce the power consumption of your device,
you may change the backlight duration and
brightness level. Also, you can save more power
by setting the phone to turn off automatically if it
is not in use for a speci
fi
c period of time.
To check battery power level
Tap
Start
>
Settings
>
System
tab >
Power
>
Batter y
tab. A bar indicates the remaining
battery power level.
To turn off the device automatically
Tap
Start
>
Settings
>
System
tab >
Power
>
Advanced
tab and select the duration before
your device turns off by itself. This feature
controls the screen standby time.
To reduce the brightness level
Tap
Start
>
Settings
>
System
tab >
Backlight
>
Extended
tab and adjust the brightness level
of
Batter y Power
or
External Power
, from
darkest to brightest.
To adjust the backlight duration
Tap
Start
>
Settings
>
System
tab >
Backlight
>
Battery Power
tab or
External Power
tab
to select backlight duration and condition for
backlight on/off under either battery power or
external power supply.
14
1
Be
for
e U
sin
g Y
o
u
r O
2
Xd
a S
te
a
lth
Chapter 2
Getting Started
2.1 Display information
2.2 Screen orientation
2.3 Setting time & date
2.4 Using the stylus
2.5 Screen alignment
2.6 Input method
2.7 Drawing on the screen
2.8 Recording a message
2.9 Editing my info
2.10 Password setup
