NXP Semiconductors K32W, Справочное руководство

Страница: 3 / 30

SECURITY
STATUS
NXP Semiconductors
JN-RM-2080
K32W module development reference manual
JN-RM-2080 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2020. All rights reserved.
Reference manual Rev. 1.0
— 27 Mar 2020
3 of 30
Contact information
For more information, please visit: http://www.nxp.com
1. Introduction
This manual describes the hardware for the reference designs for modules based around
the NXP K32W061/041 wireless microcontrollers. The NXP K32W061 version is fitted to
the NXP modules. These are small, low-power and cost-effective evaluation and
development board or application prototyping and demonstration of the K32W061 device.
The K32W061/041 is an ultra-low-power, highly integrated single-chip device that
enables Standard IEEE 802.15.4 and BLE 5.0 RF connectivity for portable, extremely
low-power embedded systems.
The K32W061/041 SoC integrates a radio transceiver operating in the 2.4 GHz ISM band
supporting IEEE 802.15.4/BLE 5.0 Radio, an ARM Cortex-M4 processor, up to 640 kB
flash,152 kB SRAM (and 128 kB ROM), BLE Link layer processing hardware and
peripherals optimized to meet the requirements of the target applications.
The design considerations presented in this manual are equally valid for bespoke
solutions where the K32W061/041 device is placed directly onto the product PCB.
Three modules models are available:
•
K32W061-001-M10
•
K32W061-001-M13
•
K32W061-001-M16
The models available are described in Table 1 .
In order to complete a successful PCB design by your own the hardware guidelines
described in this reference manual must be followed as strictly as possible. Further
information on the K32W061/041 characteristics are available in the
“K32W061/041
IEEE802.15.4 and BLE 5.0
Wireless Microcontroller” datasheet.
The K32W-001-M10 module has been fitted to a mezzanine board (OM15077) for use on
the IOTZTB evaluation kit. The module is known as K32W -001-
T 10.
The K32W-001-M16 module has been fitted to a mezzanine board (OM15077) for use on
the IOTZTB evaluation kit. The module is known as K32W -001-
T 16.
1.1 Audience
This guide is intended for systems designers
1.2 Regulatory approvals
The K32W061-001-M10 and M13 are compliant with:
•
RED 2014/53/UE
•
CFR 47 FCC part 15
•
Industry Canada requirements