NVIDIA Corporation
71
Chapter 5
Configuring Displays
Display Timing Settings
The Display Timing page is shown in
. Select the proper timing mode for
your analog display.
•
Auto-Detect
(default setting) allows Windows to receive the proper timing
information directly from the analog display.
Note:
Some older analog displays may not support this feature.
Figure 5.2
Display Timing Settings — Analog Display
•
General Timing Formula
(GTF)
is an older but widely used timing standard.
However, newer display are switching to the CVT standard.
•
Discrete Monitor Timings
(DMT)
timing is a set of pre-defined VESA timings.
VESA updates this standard every year. If DMT timing is available for a specific
mode, the NVIDIA display driver normally selects it instead of the GTF standard.
•
Coordinated Video Timings (CVT)
became the VESA standard on March 2003.
CVT supports higher resolutions better than other timing standards.
nViewGuide_.book Page 71 Thursday, September 14, 2006 1:14 PM