158
User’s Guide
Chapter 7
Configuring Key ForceWare Graphics Driver Features
Figure 7.35
Connecting Two Graphics Cards with an SLI Bridge Connector
The SLI connector is required only for SLI Frame Rendering.
6
If your graphics cards have an auxiliary power connector, connect them to the
power supply using the supplied power connector cables.
7
Replace the system’s cover and reconnect your display(s) to the SLI technology-
capable graphics card installed in the x16 expansion slot.
8
Plug the power cable back into the system.
Installing the Display Driver
Follow the steps listed below to install your driver software:
1
Turn on your computer and log into Windows.
2
Cancel the Windows “Found New Hardware Wizard” program.
This message should appear twice – one for each graphics card).
3
Run “setup.exe” in the SLI driver you saved to your desktop.
4
Follow the
Next
prompts to proceed with driver installation.
5
Once the software has been installed, choose
Yes, I want to restart my computer
now
and select
Finish
to restart your computer.
nViewGuide_.book Page 158 Thursday, September 14, 2006 1:14 PM