Section 9
Service (Bottom)
Cocoon Aqua IR Hydration Pro System
35
SECTION 9: SERVICE (BOTTOM)
9.1 Removing Side Panels
BEFORE ANY REPAIR AND/OR INSPECTION OF THE UNIT, THE
ELECTRICAL SUPPLY MUST BE SHUT OFF. BEFORE REMOVING THE SIDE
PANEL OF THE UNIT, SHUT OFF THE ELECTRICAL SUPPLY TO THE UNIT.
Tools/Supplies required: Phillips Head screwdriver, flat head screwdriver, 2
people
Removal (remove the right side panel first):
a. Use a small flat head screwdriver to gently remove the white
plastic caps over the 10 screws. There are 3 on each end and 2
on each side.
b. Use the Phillips Head screwdriver to remove the 10 screws.
c. While another person slightly lifts the front of the machine,
carefully remove the right side panel by gently pulling down and
outward on the right panel.
d) Remove the left panel in the same manner.
9.2 Drainage
Drainage is connected to bottom floor.
Smell lock has 40 mm tube. All tubes are usually 40
mm.
For cleaning, remove cover and take away smell lock.
Name
Part Number
Smell lock
E4000-36
