TFTN 085-199 Installation and Operation Manual
59
3.
Set Boiler Address
–
turn the power on to each boiler and set the Boiler Address from the
menu. The
boiler chosen for connecting the System Sensor (and if applicable Outdoor, DHW Recirc or Buffer Tank Sensors and
System Pump) must be set as Manager, while the others must be set uniquely as Follower
Boiler 1, 2…
7. See Figure
11-3.
Figure 11-3 Setting Boiler Address
Select
Setup
from the home screen
Select
from the Setup menu
Select the Boiler Address to access the configuration options.
When the controller starts the reboot sequence, turn
the power off.
Select from the dropdown menu a unique address for
each boiler, i.e., Manager, Follower Boiler 1,
2…7, then
select OK.
