System Components
● 9
2.
Then press the
Forward
button to view
the abdomen and thorax respiratory
effort signals being recorded, as well
as getting information of patient’s
position and whether a snoring signal
is being recorded.
3.
Press the
Forward
button again will
show the actual oxygen saturation and
pulse rate of the patient.
Power
The Nox T3 device is powered by one AA battery. The battery lasts for a minimum of 3x 8 hours.
Inserting the Battery:
1.
To open the battery compartment press down the battery compartment pin with a pen or
similar tool and slide the lid towards the bottom of the device
2.
Place one AA battery in the compartment aligning the battery poles as illustrated on the back
of the device (the positive (+) pole is towards the battery lid)
3.
Close the battery compartment by pressing the lid back towards the device without causing
any strain, then slide it back into position, towards the top of the device. Make sure the lid is
securely closed.
Checking the Battery:
The battery status indicator
positioned in the upper right hand corner of the device’s display
allows the user to check the battery status during recording.
!
► To avoid risk of leakage, battery should not be stored in the device for a prolonged
period of time.
► Always use fully charged or fresh battery for each sleep study.
