Hook-Up
● 24
thorax by fasten the clip strap to the night-
clothing of the patient
Step 2: Place the respiratory effort sensor
around the patient’s thorax by snapping its
ends to the back panel of the device
Step 3: The belt length is adjusted using the
sliders. The slider is fixed by the Velcro and
secured by the attached tape.
Step 4: The abdomen - thorax cable is
snapped to the back of the device and the
cable length adjusted if needed by wrapping
it up around the abdomen end
Step 5: The abdomen belt is snapped to the
abdomen cable and the length adjusted if
needed (see step 3)
