System Components
● 10
The Nox T3 Application – Noxturnal
The Nox T3 application (Noxturnal) is used to configure the device for recording, and downloading,
viewing and analyzing of recorded data. Refer to section
Nox Noxturnal
for detailed description.
Respiratory Effort Sensor (Belt)
The device uses two identical respiratory effort sensors to measure the respiratory effort of the patient.
One belt is placed around the patient’s abdomen and the other around the patient’s thorax. The belts
are made out of knitted elastic with insulated wire conductor and have a plastic glider for adjustment of
belt length. They are terminated with a metal snap at the ends that allows for the connection to the Nox
T3 device.
The belts are available in two versions and are adjustable to fit patient circumference from 40cm up to
205cm (Xin).
!
► The respiratory effort sensors should be worn over night-clothing or a T-shirt.
► The respiratory effort sensors are single patient use.
Abdomen –Thorax Cable
The abdomen-thorax cable connects together the abdomen respiratory effort sensor and the device via
metal snaps on each end of the cable. The cable is wrapped up around the abdomen end for adjustment
of length.
