System Components
● 8
Number Function
1
Battery lid - Covers the battery and the USB connector
2
Battery compartment pin – Pressed down with a simple tool to open the battery
compartment
3
Metal snaps - Used to connect to thorax respiratory effort sensor
4
Metal snaps - Used to connect to abdomen-thorax cable
Starting/Stopping a Recording
The
Select button
located on the front panel of the device can be used to manually start and stop a
recording.
To manually start a recording:
Hold down the S
elect
button for at least 3 seconds
!
► The configuration of the device must have been set to
Manually Start Recording
, refer
to section Configuring the Device.
► The device must be disconnected from the PC (have a battery located in its battery
compartment) to be able to start a recording.
To stop the recording
: Hold down the S
elect
button for at least 3 seconds
To start the recording again:
Hold down the S
elect
button again for at least 3 seconds
Navigating the Nox T3 device
The device has three push buttons
(Select, Backward and Forward)
located on the front panel that are
used to get information on the recording taking place. Pressing the
Forward
button will navigate to the
next page and pressing the
Backward
button will navigate to the previous page.
To navigate the information pages during a recording perform the following steps:
1.
Press the
Select
button to get
information on the duration of the
recording, actual time and battery
status.
