Hook-Up
● 25
!
► The device and respiratory effort sensors (belts) should be worn over night-clothing.
► The belt should fit the patient snugly without being uncomfortably tight.
Recording of Respiratory Sounds and Snoring
No applying of external sensor is needed for recording of respiratory sounds and snoring as the devices
uses an inbuilt microphone.
Applying the Nasal Cannula
Step 1: Place the nasal prongs
gently in the nostrils
Step 2: Drape the cannula
tubing over the ears and then
position it under the chin
Step 3: Slide the fastener snugly
under the chin to hold the
cannula tubing securely in
place.
Step 4: Connect the nasal
cannula connector to the
pressure lock on the device
!
► Medical tape can be used to hold the cannula against the cheeks to secure the cannula
in place if necessary
► The nasal cannula is single patient use
Attaching Electrodes
The electrodes are placed on applicable locations on the body depending on the type of study.
!
► Make sure the skin is clean before applying the electrode
► The ExG sensors are single use.
