System Components
● 12
Pulse Oximeter
The Nonin pulse oximeter is an optional sensor which measures SpO2, pulse rate and
plethysmographic data. It is worn on the patient’s wrist and sends data to the Nox T3 device via
Bluetooth®
wireless technology. The oximeter is battery powered.
Inserting Batteries
The Nonin pulse oximeter requires two AA alkaline batteries.
1.
Remove the battery cover of the pulse oximeter to open the battery compartment
2.
Place two AA batteries in the compartment aligning the battery poles as illustrated on the
bottom of the battery cover
3.
Close the battery compartment. Make sure the cover is securely closed.
Oximeter Sensors
The Nonin oximeter pulse oximetry module supports all Nonin PureLightTM pulse oximeter sensors:
Nonin’s Models Soft Sensor - Reusable
Preferred Application Site
Model 8000SL/SL-WO (large)
Fingers, Toe
Model 8000SM/SM-WO (medium)
Fingers, Toe
Model 8000SS/SS-WO (small)
Fingers, Toe
Nonin’s Models Finger Clip Sensor - Reusable
Model 8000AA - Adult
Index, middle or ring fingers
Model 8000AP - Pediatric
Index, middle or ring fingers
Nonin’s Model s Ear Clip Sensor - Reusable
Model 8000Q
Ear lobe
Nonin’s Model s Reflectance Sensor - Reusable
Model 8000R
Middle forehead
Nonin’s Models Flex Sensor - Reusable
Model 8000J + 8000JW -Adult Flex Sensor and Wrap
Index, middle or ring fingers
Model 8008J + 8000JFW -Infant Flex Sensor and Wrap
Toe, thumb, medial aspect of
hand
