manualshive.com logo in svg

Novexx Solutions XLP 504, Руководство по обслуживанию

Сервисный мануал для принтера Novexx Solutions XLP 504 доступен для бесплатного скачивания на manualshive.com. Получите подробные инструкции по эксплуатации и обслуживанию устройства, чтобы с легкостью поддерживать его в отличном состоянии. Скачайте мануал сейчас и ознакомьтесь с функциональностью вашего принтера.

Поделиться
Скачать
background image

Service manual  

XLP 504 / XLP 506

05/2018 | 06

233

Appendix

#G-----------------------------------------------------------------------------
#G Options 

►

 TCS

#G-----------------------------------------------------------------------------
#PC3301/0                     #G  Changelabel Mode : Easyplug select
#PC3303/10                    #G  Changelab Length : +  10 mm
#PC3302/1                     #G  Changelab Print  : With print
#PC3304/0                     #G  Label Eject Mode : No
#G-----------------------------------------------------------------------------
#G Options 

►

 LTSA

#G-----------------------------------------------------------------------------
#PC3152/0                     #G  Apply mode       : After start sig.
#PC3153/190                   #G  Stroke length    :  190 mm
#PC3154/0                     #G  Appl. waitpos.   :    0 mm
#PC3155/350.0                 #G  Applicator speed : 350 mm/s
#PC3158/0                     #G  Restart delay    :     0 ms
#G-----------------------------------------------------------------------------
#G System
#G-----------------------------------------------------------------------------
#PC2051/1                     #G  Language         : English
#PC2053/0                     #G  Access authoriz. : Off
#PC2081/0                     #G  Run Setup Wizard?: No
#PC2020/1                     #G  Turn-on mode     : Online
#G-----------------------------------------------------------------------------
#G System 

►

 Hardware Setup

#G-----------------------------------------------------------------------------
#PC5001/1                     #G *Printer type     : XLP 5
#PC5002/1                     #G *Printhead type   : KPA 300 DPI
#PC2024/641                   #G *Head resistance  :  641 Ohm /  8 Dot
#PC2025/1202                  #G *Head resistance  : 1202 Ohm / 12 Dot
#PC2080/1530                  #G *Head resistance  : 1530 Ohm / 24 Dot
#PC2016/0                     #G  Head-sensor dist :    0 mm
#G-----------------------------------------------------------------------------
#G System 

►

 Memory

#G-----------------------------------------------------------------------------
#PC2048/4096                  #G  Free store size  : 4096 KBytes
#PC2046/512                   #G  Ram disk size    : 512 KBytes
#PC2047/256                   #G  Font downl. area : 256 KBytes
#PC1104/64                    #G  Spooler size     :  64 KBytes
#PC5129/0                     #G  Flash Res. Area  :   0 KBytes
#G-----------------------------------------------------------------------------
#G System 

►

 Print

#G-----------------------------------------------------------------------------
#PC2029/2                     #G  Miss. label tol. : 2
#PC2067/1                     #G  Gap detect. mode : Autom. forward
#PC2068/5                     #G  Foil stretching  : Feedback:  5 mm
#PC2033/1                     #G  Singlestartquant : 1
#PC2050/0                     #G  Reprint function : Off
#PC2083/5.0                   #G  Foil end warning :  5.0 m
#PC2003/34.3                  #G  Foil end warning : 34.3 mm
#PC2060/0                     #G  Foil warn stop   : Off
#PC2022/1                     #G  Error reprint    : On
#PC2023/0                     #G  Single-job mode  : Off
#PC2026/20                    #G  Temp. reduction  :  20 %
#PC2049/0                     #G  Print info mode  : Par.values right
#G-----------------------------------------------------------------------------
#G Printer Language
#G-----------------------------------------------------------------------------
#PC2012/0                     #G  Print Interpret. : Easyplug
#G-----------------------------------------------------------------------------
#G Printer Language 

►

 EasyPlug Setting

#G-----------------------------------------------------------------------------
#PC2014/1                     #G  Character filter : All characters
#PC2013/3                     #G  Character sets   : Germany
#PC2071/1                     #G  EasyPlug errors  : Strict handling
#PC1102/0                     #G  Spooler mode     : Mult. print jobs
#PC1550/0                     #G  StandAlone Input : None
#PC5310/0                     #G  ##VW/I Interface : Easyplug
#PC1103/1                     #G *Printer ID no.   : 1
#PC5004/0                     #G  Command sequence : '##'

Содержание XLP 504

























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XLP 504

Team Kalorik TKG WPM 1000 Operating Instructions Manual preview
TKG WPM 1000
Бренд: Team Kalorik Страницы: 32
Dacor CM24TBISAS Installation Instructions Manual preview
CM24TBISAS
Бренд: Dacor Страницы: 16
Saeco MAGIC M2 Quick Start Manual preview
MAGIC M2
Бренд: Saeco Страницы: 48
Elgento E13010 Safety & Instruction Manual preview
E13010
Бренд: Elgento Страницы: 12
UFESA CG7214 Instruction Manual preview
CG7214
Бренд: UFESA Страницы: 22
MUNBYN ITPP988 User Manual preview
ITPP988
Бренд: MUNBYN Страницы: 18
Rommelsbacher WA 1250 Instruction Manual preview
WA 1250
Бренд: Rommelsbacher Страницы: 20
Gastroback DESIGN COFFEE AROMA PLUS Manual preview
DESIGN COFFEE AROMA PLUS
Бренд: Gastroback Страницы: 44
Hoshizaki KM-632DSU Service Manual preview
KM-632DSU
Бренд: Hoshizaki Страницы: 78
Saeco RI9752/01 Operating And Maintenance Manual preview
RI9752/01
Бренд: Saeco Страницы: 40
Vitek VT-1512 Manual Instruction preview
VT-1512
Бренд: Vitek Страницы: 32
Krups NESCAFE DOLCE GUSTO KP250950 User Manual preview
NESCAFE DOLCE GUSTO KP250950
Бренд: Krups Страницы: 36
Omcan IC-CN-1450-E Instruction Manual preview
IC-CN-1450-E
Бренд: Omcan Страницы: 16
Team Kalorik TKG CHM 1001 Operating Instructions Manual preview
TKG CHM 1001
Бренд: Team Kalorik Страницы: 44
White and Brown La Tessara MP 546 User Manual preview
La Tessara MP 546
Бренд: White and Brown Страницы: 24
Capresso CAPRESSO CoffeeTEC Manual preview
CAPRESSO CoffeeTEC
Бренд: Capresso Страницы: 12
U-Line CLR1215 User Manual preview
CLR1215
Бренд: U-Line Страницы: 7
U-Line U-ADA15IMB-00A Quick Start Manual preview
U-ADA15IMB-00A
Бренд: U-Line Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды