Novexx Solutions XLP 504, Руководство по обслуживанию

Страница: 115 / 248

Service manual
XLP 504 / XLP 506
05/2018 | 09 115 Parameter Menu
Tradit. Imaging

Only in service mode
Up to firmware version x.31, the barcode height was calculated with the formula:
with x =
Print > Format > Bar code multip.
By doing so, the printed barcode height in millimeters was by 1 higher than the value defined in the
layout (1 --> 2 mm, 2 --> 3 mm, etc.)
1
.
From firmware version x.31 on, the printed barcode is exactly as high in millimeters, as the value
in the layout is (1 --> 1 mm, 2 --> 2 mm, etc.) 1.
• No : New height calculation (1 --> 1 mm, 2 --> 2 mm, etc.) is applied.
The plain copy line is printed with OCR-B font.
• Yes : Setting for customers with print layouts based on the old height calculation scheme.
The plain copy line of the barcodes EAN8, EAN13, UPC-A and UPC-E is printed with the same
fonts, which older printer types like TTK or TTX x50 have used.
UPC plain-copy
The position of the first and last digit in the plain-copy line - underneath the bar code - can be ad-
justed as required.
• Raised : First and last digit of the UPCA or first digit with the UPCE are raised.
• In line : All digits in the decoded line are in line under the code.
EAN Readline
• Standard : Readline without "<>" or ">" signs.
• <> Signs : Readline enclosed in "<>" signs or terminated by a ">"-Sign (EAN 13).
EAN sep. lines
EAN separation lines. Parameter for controlling of EAN or UPC barcodes if they are printed without
readline.
• With readl. only : The separation bars at the beginning, middle, and the end of the barcode are
only long, if the barcode is printed with a readline.
• Always long : The separation bars at the beginning, middle, and the end of the barcode are al-
ways long, regardless if the barcode is printed with or without readline. The position of the bar-
code is the same as with the readline option switched on.
Setting range Default setting Step width Easy Plug
No, Yes No --
1) Assumed that
Print > Format > Bar code multip.
= „1“
Setting range Default setting Step width Easy Plug
In line, Raised In line -- #PC1010, #YB
Setting range Default setting Step width Easy Plug
Standard, <> Signs Standard -- #PC1011, #YB
Setting range Default setting Step width Easy Plug
With readl. only, Always long With readl. only --
Barcodehight
Print
Barcodehight
Layout
1 +
 
x

=