manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Руководство администратора

Административное руководство по управлению Novell ZENworks Linux Management 7.3 IR2 предоставляет полную информацию о настройках и управлении продуктом. Вы можете скачать бесплатно этот руководство на manualshive.com. Узнайте больше о возможностях и функциях этого продукта для эффективного управления вашей инфраструктурой Linux.

Поделиться
Скачать
background image

650

Novell ZENworks 7.3 Linux Management Administration Guide

no

vd

ocx 

(e

n)

  

7 Ja
nua
ry 201

0

F.3.2  Command Line Parameters and Variables

There are four types of command line parameters that can be used with the ZENworks imaging 
process. They are entered manually on the command line when booting from a CD or they can be 
placed in the 

isolinux.cfg

 file located in the 

/boot/loader

 directory. The commands are also 

located in the 

*.cfg

 files for PXE and are located in the 

/srv/tftp

 directory on the ZENworks 

imaging server.

Š

Kernel parameters: 

The valid parameters for the Linux kernel are found in the 

/

Documentation/kernel-parameters.txt

 file that is installed with the kernel source.

Some devices have a faulty BIOS, where you must turn off ACPI processing for the kernel to 
load properly. To do this, use the kernel parameter acpi=off. For more information, see 

Novell 

Support (http://www.novell.com/support/
search.do?cmd=displayKC&docType=kc&externalId=10099330&sliceId=&dialogID=128433
7&stateId=1%200%20548668)

.

Š

Linuxrc parameters: 

These parameters affect the way linuxrc detects hardware or sets 

hardware settings. They are described briefly in the 

/usr/share/doc/packages/linuxrc/

linuxrc.html

 file in a Linux system.

Linuxrc parameters can be found in the 

/linuxrc.config

 or 

/info

 files that reside in the 

initrd

 file system. Some parameters can be placed in the 

settings.txt

 file that is located on 

the root of the imaging CD or ZENworks partition, or in the 

/srv/tftp/boot

 file for PXE 

booting.
Parameters that can be placed in the 

settings.txt

 file (the easiest file to edit) are limited. 

During PXE booting, parameters that affect the network are not processed from 

settings.txt

, because by the time linuxrc loads the 

settings.txt

 file, the network is 

already set up. Network settings can be placed in the 

settings.txt

 file when booting from an 

imaging CD, because it is loaded early enough in the process to take effect.

Š

ZENworks variables: 

Some environment variables affect the way imaging performs. They 

can be configured in any file, but should normally be configured in the 

settings.txt

 file.

If you add variables to the 

settings.txt

 file that were not originally defined there, you must 

export the variable. For example, in the 

settings.txt

 file, enter:

export IMGCMD=”myscript”

A list of all image engine or script variables is listed under 

Section F.7, “Variables and 

Parameters,” on page 659

.

Š

Other variables: 

Environment variables that you might want in your script can be added in the 

same manner as described for the ZENworks variables.

F.4  Modifying ZENworks Imaging Resource Files

From time to time you might want to modify an imaging distribution by adding your own files. 
These can be additional programs, scripts, data files, or updated Linux drivers.

You can use the following methods to update imaging resource files:

Š

The easiest method is to edit the 

settings.txt

 file, which is located on the root of the 

imaging CD or in 

/srv/tftp/boot

 on the ZENworks Imaging Server for PXE booting.

Содержание ZENWORKS LINUX MANAGEMENT 7.3 IR2













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZENWORKS LINUX MANAGEMENT 7.3 IR2

XenSource DL385 - ProLiant - G5 Manual preview
DL385 - ProLiant - G5
Бренд: XenSource Страницы: 313
GARDINER TECHNOLOGY GARDTEC SPEECH DIALLER Installation & Programming Instructions preview
GARDTEC SPEECH DIALLER
Бренд: GARDINER TECHNOLOGY Страницы: 38
SanDisk musicmatch User Manual preview
musicmatch
Бренд: SanDisk Страницы: 11
Ulead COOL 3D 3.0 Manual preview
COOL 3D 3.0
Бренд: Ulead Страницы: 80
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.1 Tuning Manual preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.1
Бренд: Red Hat Страницы: 160
Yamaha YC-3B Installation Manual preview
YC-3B
Бренд: Yamaha Страницы: 4
Yamaha YC-3B Owner'S Manual preview
YC-3B
Бренд: Yamaha Страницы: 6
Yamaha USB Installation Manual preview
USB
Бренд: Yamaha Страницы: 7
Yamaha Studio Manager v.2 Owner'S Manual preview
Studio Manager v.2
Бренд: Yamaha Страницы: 11
Yamaha Studio Manager v.2 Installation Manual preview
Studio Manager v.2
Бренд: Yamaha Страницы: 15
Yamaha VL Visual Editor Manual preview
VL Visual Editor
Бренд: Yamaha Страницы: 23
Yamaha TOOLS for MY16-mLAN Owner'S Manual preview
TOOLS for MY16-mLAN
Бренд: Yamaha Страницы: 24
Yamaha TOOLS for TYROS Installation Manual preview
TOOLS for TYROS
Бренд: Yamaha Страницы: 36
Acroprint TimeStation PC Quick Start Manual preview
TimeStation PC
Бренд: Acroprint Страницы: 2
FieldServer FS-8704-07 Driver Manual preview
FS-8704-07
Бренд: FieldServer Страницы: 15
Autodesk 22505-051400-9000 - AutoCAD Electrical 2008 User Manual preview
22505-051400-9000 - AutoCAD Electrical 2008
Бренд: Autodesk Страницы: 1304
Janome AcuFil Tips And Tricks Manual preview
AcuFil
Бренд: Janome Страницы: 6
Bai cells EG7035 User Manual preview
EG7035
Бренд: Bai cells Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды