Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Руководство администратора

Страница: 541 / 684

Generating ZENworks Reports 541
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
4 To generate the report, click Generate .
42.5 Generating Reports
You can generate an existing report, or generate multiple reports simultaneously. After the system
displays the report, you can print the information or export and view the data in HTML, CSV, or
XML formats.
1 In the ZENworks Control Center, click the Reports tab.
2 To generate a report, select the report’s check box, then click Generate .
or
3 To generate a batch of reports, select the report folder’s check box, then click Generate .
You can also select individual reports and run them simultaneously.
The following graphic is a sample of a generated ZENworks report.
Field Description
General Revise the report description.
Columns Add, delete, or change the column layout and sorting details of the
report. See
Section 42.2, “Creating a Report,” on page 536 for more
information about adding columns to a report.
Novell recommends that you use the Message From This Type
Object column only in conjunction with other message and device
columns and filters. If you add other types of columns or filters, the
message displayed in this column might be inaccurate. Known
exceptions of device columns and filters that also cause this
inaccuracy are
Š
Device Code Page
Š
Device Virtual Memory
Š
Device Visible Memory
Filters Revise, add, or delete the report filters. See Section 42.2, “Creating a
Report,” on page 536 for more information about naming, formatting,
and filtering.
Generate Runs the report based on the settings displayed on the page. See
Section 42.5, “Generating Reports,” on page 541 for more
information.
Apply Saves the new settings.
Reset Resets the report to its original settings.