Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Руководство администратора

Страница: 260 / 684

260 Novell ZENworks 7.3 Linux Management Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
If a bundle has multiple packages, when one or more package is removed, the bundle is still
marked as installed in the ZENworks Control Center. Depending on the bundle's schedule, the
server may re-install the package.
10 Click Next to display the Summary page.
11 Click Finish to create the policy as configured per settings on the Summary page. If you click
Finish , the Remote Execute policy is created but it does not have devices assigned or a
schedule. At some point in the future, you need to configure additional options for the policy by
continuing with
Section 17.4, “Assigning Policies,” on page 188 .
or
Click
Next to display the Policy Assignments page to perform the following tasks:
Š
Specify assignments for this policy
Š Specify the schedule for this policy
Š
Specify groups for this policy
12 Assign the policy to the devices.
12a Click Add to browse for and select the appropriate Server or Workstation objects.
You can also select Folder or Group objects.
12b Click the down-arrow next to Servers or Workstations to expand the list, then click the
underlined link in the Name column to select the desired objects and display their names
in the Selected list box.
Assigning a policy to a Folder or Group object is the preferred method of assigning the
policy. Assigning the policy to a large number of objects (for example, more than 250)
might cause increased server utilization.
12c Click OK .
13 Click Next to display the Policy Schedule page, select the schedule to apply to the assignments
from the drop-down list, which vary, depending on the schedule type you select.
The settings you configure on this page determine when the policy is assigned to devices.
The following schedules are available. Click the link in the left column for more information
about each schedule type and its options.