Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Руководство администратора

Страница: 108 / 684

108 Novell ZENworks 7.3 Linux Management Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
The following sections contain additional information:
Š
Section 12.1, “Managing Registration Keys,” on page 108
Š
Section 12.2, “Managing Registration Rules,” on page 113
Š
Section 12.3, “Creating Folders,” on page 119
12.1 Managing Registration Keys
You can define the keys that are used to register devices in the Management Zone. A registration key
specifies a set of assignments that are applied to devices that register using that key. The key must be
applied during installation of the ZENworks Agent on a device, either manually or by using a script.
If you do not want to use registration keys, you can create registration rules to determine a device's
assignments when it registers without using a key. The major difference between using the default
registration rules versus using a registration key is that the default registration rules use a filter to
determine which set of device assignments to apply, but a key corresponds directly to a specific set
of assignments to apply. For more information, see
Section 12.2, “Managing Registration Rules,” on
page 113 .
You can use the ZENworks Control Center or the zlman command line utility to create and modify
registrations. The following procedures explain how to perform these tasks using the ZENworks
Control Center. If you prefer the zlman command line utility, see the Registration Commands
section of
zlman (1) (page 562) .
The following sections contain additional information:
Š
Section 12.1.1, “Creating Keys to Register Devices,” on page 108
Š
Section 12.1.2, “Editing Existing Registration Keys,” on page 111
Š
Section 12.1.3, “Renaming, Copying, or Moving Registration Keys,” on page 112
Š
Section 12.1.4, “Deleting Registration Keys,” on page 112
12.1.1 Creating Keys to Register Devices
1 In the ZENworks Control Center, click the Configuration tab.
2 In the Registration Keys section, click New , then click Registration to launch the Create New
Registration Key Wizard.