manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Руководство администратора

Административное руководство по управлению Novell ZENworks Linux Management 7.3 IR2 предоставляет полную информацию о настройках и управлении продуктом. Вы можете скачать бесплатно этот руководство на manualshive.com. Узнайте больше о возможностях и функциях этого продукта для эффективного управления вашей инфраструктурой Linux.

Поделиться
Скачать
background image

560

Novell ZENworks 7.3 Linux Management Administration Guide

no

vd

ocx 

(e

n)

  

7 Ja
nua
ry 201

0

Bundle - 

Restricts the mirroring operation on the catalog to the specified bundles. If the bundle 

is not specified, all bundles are mirrored. This option is valid only for ZLM and YaST source 
servers. It can be specified multiple times, and can contain either a bundle name or a regular 
expression string for matching bundle names. See the note below about regular expressions for 
more information.

LocalBundleName - 

Renames the bundle name locally.This is applicable only for the RCE, 

NU, and RHN services in which a catalog has only one bundle on the remote server. If you 
specify 

<LocalBundleName>

, you must not specify the 

<Bundle>

 tag. This tag is not 

applicable when you mirror OES from the RCE service with more than one bundle per catalog. 

ExcludeBundle -  

Same as Bundle, except packages and patches contained in the specified 

bundle or bundles are excluded. This option is valid only for ZLM and YaST source servers, 
can be specified multiple times, and can contain either a bundle name or a regular expression 
string for matching bundle names. ExcludeBundle is performed after Bundle, so bundles 
appearing in a Bundle and ExcludeBundle are ultimately excluded. See the note below about 
regular expressions for more information. 

Package -  

Restricts the mirroring operation on the catalog to the specified packages. If the 

package is not specified, all packages are mirrored. This option can be specified multiple times, 
and can contain either a package name or a regular expression string for matching package 
names. This option is not supported for patch bundles. Filtering of packages in a patch bundle 
is not supported for RCE, YaST, and NU type of remote servers. See the note below about 
regular expressions for more information.

ExcludePackage -  

Same as Package, except specified packages are excluded. This option can 

be specified multiple times, and can contain either a package name or a regular expression 
string for matching package names. This option is not supported for YOU patches. 
ExcludePackage is performed after Package, so packages appearing in a Package and 
ExcludePackage are ultimately excluded. See the note below about regular expressions for 
more information.

Category: 

Restricts the mirroring operation on the catalog to the specified categories of patch 

bundles. If the category is not specified, all patch bundles are mirrored. Valid values are 
recommended, optional, and security. This tag is applicable only for the RCE type servers and 
NU type servers of SLES 10, SLED 10, and OES 2. 

ServicePackGroups - 

Accepts Boolean values (true or false) only. By default 

<ServicePackGroups> is set to true, and it automatically creates bundle groups. This option is 
supported for YOU patches only.

AutoDeploy - 

Mirroring the packages to existing bundle creates a newer version of the bundle 

and deploys it on the server. If AutoDeploy is set to false, then the mirroring operation restricts 
the deployment of the newer bundle. Accepts only the boolean values (true or false). By 
default, the option is set to true. 

CreateMonolithicBundle -  

Automatically creates monolithic package bundles consisting of 

only latest package rpms. It creates a separate monolithic bundle for each Service Pack release, 
and a separate monolithic bundle with the updates after the latest Service Pack release. It 
accepts Boolean values (true or false) only. By default the option is set to true. This option is 
supported for YOU patches only. 

FilterPatchRPM -  

Restricts the mirroring operation of the YOU patch bundles to filter all the 

packages of the 

.patch.rpm

 type. This option creates an equivalent RPM package bundle in 

the local server. Accepts only the Boolean values (true or false). By default, the option is set to 
false. This option is supported only for the YOU patches.

Содержание ZENWORKS LINUX MANAGEMENT 7.3 IR2













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZENWORKS LINUX MANAGEMENT 7.3 IR2

Canon Optura Pi Install Manual preview
Optura Pi
Бренд: Canon Страницы: 2
Canon imagePROGRAF W6400 Manual preview
imagePROGRAF W6400
Бренд: Canon Страницы: 84
F-SECURE ANTI-VIRUS FOR MIMESWEEPER - Administrator'S Manual preview
ANTI-VIRUS FOR MIMESWEEPER -
Бренд: F-SECURE Страницы: 44
Symantec WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2 Reference preview
WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2
Бренд: Symantec Страницы: 22
Amanda Amanda@Work.Group/DOS Version 7.xx User Manual preview
[email protected]/DOS Version 7.xx
Бренд: Amanda Страницы: 84
Amanda Amanda Portal CallQ Agent User Manual preview
Amanda Portal CallQ Agent
Бренд: Amanda Страницы: 61
Amanda Amanda Portal Telephone Features System Reference Manual preview
Amanda Portal Telephone Features
Бренд: Amanda Страницы: 226
Red Hat CERTIFICATE SYSTEM 8.0 - ADMINISTRATION Admin Manual preview
CERTIFICATE SYSTEM 8.0 - ADMINISTRATION
Бренд: Red Hat Страницы: 564
Unibrain API-810 User Manual preview
API-810
Бренд: Unibrain Страницы: 77
UNIBLUE DRIVERSCANNER 2009 Manual preview
DRIVERSCANNER 2009
Бренд: UNIBLUE Страницы: 62
Datamax 123 Print v1.1x User Manual preview
123 Print v1.1x
Бренд: Datamax Страницы: 226
Davis Instruments Energy WeatherLink User Manual preview
Energy WeatherLink
Бренд: Davis Instruments Страницы: 47
Focusrite LiquidControl Manual preview
LiquidControl
Бренд: Focusrite Страницы: 22
Alpine NVD-A211 SMART MAP PRO Owner'S Manual preview
NVD-A211 SMART MAP PRO
Бренд: Alpine Страницы: 95
Lenovo ThinkCentre M51 (Korean) User Manual preview
ThinkCentre M51
Бренд: Lenovo Страницы: 72
Xerox DocuSP 50. Series User Manual preview
DocuSP 50. Series
Бренд: Xerox Страницы: 32
Xilinx LogiCORE IP Ethernet 1000BASE-X PCS/PMA or SGMII v9.1 User Manual preview
LogiCORE IP Ethernet 1000BASE-X PCS/PMA or SGMII v9.1
Бренд: Xilinx Страницы: 230
Canon ZR200 Software Instruction Manual preview
ZR200
Бренд: Canon Страницы: 69

Бренды по названию

Популярные бренды

Загрузить еще бренды