manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Руководство администратора

Административное руководство по управлению Novell ZENworks Linux Management 7.3 IR2 предоставляет полную информацию о настройках и управлении продуктом. Вы можете скачать бесплатно этот руководство на manualshive.com. Узнайте больше о возможностях и функциях этого продукта для эффективного управления вашей инфраструктурой Linux.

Поделиться
Скачать
background image

Mirroring Software

299

no

vd

ocx 

(e

n)

  

7 Ja
nua
ry 201

0

Local Name 

Name of the catalog you want the mirrored software placed in. If no Local 
Name is specified, the catalog name from the remote server is used. The local 
name for the catalog should not be same as that reserved for the 
<catalogname>-patches folder

Folder

Specifies the eDirectory

TM

 folder (for example, 

/folder1/folder2

) where 

bundles and catalogs are created and updated. If not specified, the catalogs 
and bundles are created and updated in the 

/zlmmirror

 folder.

Target

Restricts the mirroring operation on this catalog to packages and patches that 
support the specified target platforms. If no target is specified, packages for all 
platforms are mirrored.

This element can be specified multiple times, and can contain either a target 
name or a regular expression string for wildcard matching of target names.

For example, to include targets beginning with sles such as sles-9-i586, use 
the regular expression 

<Target>

sles.*

</Target>

.

ExcludeTarget

Same as Target, except packages and patches supporting the specified target 
platform(s) are excluded. ExcludeTarget is performed after Target, so 
platforms appearing in a Target and ExcludeTarget are ultimately excluded. 
For example, to exclude targets that end with i586 such as sles-9-i586, use 
the regular expression 

<ExcludeTarget>

.*i586

</ExcludeTarget>

.

Bundle

Restricts the mirroring operation on this catalog to the specified bundles. If not 
specified, all bundles are mirrored.

This option is valid only for ZENworks Linux Management and YAST source 
servers. It can be specified multiple times and can contain either a bundle 
name or a regular expression string for matching bundle names.

LocalBundleName

Renames the bundle name locally. This is applicable only for the RCE, NU, 
and RHN services in which a catalog has only one bundle on the remote 
server. If you specify 

<LocalBundleName>

, you must not specify the 

<Bundle>

 tag. This tag is not applicable when you mirror OES from the RCE 

service with more than one bundle per catalog.

ExcludeBundle

Same as Bundle, except packages and patches contained in the specified 
bundles are excluded.

This option is valid only for ZENworks Linux Management and YAST source 
servers. It can be specified multiple times and can contain either a bundle 
name or a regular expression string for matching bundle names.

ExcludeBundle is performed after Bundle, so bundles appearing in a Bundle 
and ExcludeBundle are ultimately excluded.

Package

Restricts the mirroring operation on this catalog to the specified packages. If 
not specified, all packages are mirrored. This option can be specified multiple 
times, and can contain either a package name or a regular expression string 
for matching package names. This option is not supported for YOU patches.

ExcludePackage

Same as Package, except specified packages are excluded. This option can 
be specified multiple times, and can contain either a package name or a 
regular expression string for matching package names. This option is not 
supported for YOU patches. ExcludePackage is performed after Package, so 
packages appearing in a Package and ExcludePackage are ultimately 
excluded. 

Configuration Element

Description

Содержание ZENWORKS LINUX MANAGEMENT 7.3 IR2













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZENWORKS LINUX MANAGEMENT 7.3 IR2

M-Audio SESSION Quick Start Manual preview
SESSION
Бренд: M-Audio Страницы: 6
Philips BS03313 Brochure preview
BS03313
Бренд: Philips Страницы: 2
Philips BS03210 Brochure preview
BS03210
Бренд: Philips Страницы: 2
Philips Cineos 42PF9831D Specifications preview
Cineos 42PF9831D
Бренд: Philips Страницы: 3
Philips BS01113 Brochure preview
BS01113
Бренд: Philips Страницы: 2
Philips 37-LCD 37PF9431D Specifications preview
37-LCD 37PF9431D
Бренд: Philips Страницы: 3
Philips 37-LCD 37PF9431D Software Upgrade Instructions preview
37-LCD 37PF9431D
Бренд: Philips Страницы: 3
Philips KBD-SFTCFG Installation Instructions Manual preview
KBD-SFTCFG
Бренд: Philips Страницы: 16
Philips 37-LCD 37PF9431D Service Manual preview
37-LCD 37PF9431D
Бренд: Philips Страницы: 201
Q-See Remote Client 4.0.1 User Manual preview
Remote Client 4.0.1
Бренд: Q-See Страницы: 72
AVG LINKSCANNER User Manual preview
LINKSCANNER
Бренд: AVG Страницы: 47
AVG RESCUE CD - FOR WINDOWS V 85.2 User Manual preview
RESCUE CD - FOR WINDOWS V 85.2
Бренд: AVG Страницы: 83
AVG ANTI-VIRUS BUSINESS EDITION 2011 - REV 2011.01 User Manual preview
ANTI-VIRUS BUSINESS EDITION 2011 - REV 2011.01
Бренд: AVG Страницы: 128
Venstar Skyport Communications Installation Instructions Manual preview
Skyport Communications
Бренд: Venstar Страницы: 41
Sierra Wireless Writing an embedded application loader Application Note preview
Writing an embedded application loader
Бренд: Sierra Wireless Страницы: 9
Sierra Wireless IP Manager Configuration Manual preview
IP Manager
Бренд: Sierra Wireless Страницы: 16
Symantec Norton Antispam Personal Firewall and Systemwork - Norton Antispam User Manual preview
Norton Antispam Personal Firewall and Systemwork - Norton Antispam
Бренд: Symantec Страницы: 33
Symantec NORTON 360 5.0 User Manual preview
NORTON 360 5.0
Бренд: Symantec Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды