Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Руководство администратора

Страница: 242 / 684

242 Novell ZENworks 7.3 Linux Management Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
Description: Displays the selected object's description, if one was provided when the
bundle was created. The description provides a short description of the bundle's contents.
This description displays in the ZENworks Control Center interface and in the user
interface.
Click
Edit to change the bundle group's description, if necessary.
2b
Review the information in the Assignments section, then make the desired configuration
changes.
The
Assignments section lists the devices that are assigned to the selected bundle. You can
click the device name to view information about each device that is directly assigned to
the bundle, including its schedule and other options.
You can also use the following options:
Advanced: Click Advanced to display the Edit Assignments page, which includes a list of
the devices that are assigned to the selected bundle, the folder that contains each device,
each device's deployment and installation schedule, and whether the
Allow remove , Dry
run and Bundle Lock options are enabled. You can use the Edit Assignments page to edit
certain settings, such as the deployment and installation schedules as well as the Allow
remove , Dry run options and Bundle Lock .
Add: Click Add to launch the Assign Bundle Wizard to select the devices to be assigned
to the selected bundle. For more information, see Section 20.4, “Assigning Bundles,” on
page 238 .
Remove: Select the device by clicking the check box next to the appropriate device name,
then click Remove to remove the device's assignment from this bundle.
Action > Deploy and Install Now: Click Action > Deploy and Install Now to
immediately deploy and install the bundle on the selected device (without regard to its
schedule or waiting for a device refresh). To access the
Action menu, you must select a
device or device folder by clicking the check box next to its name.
2c
Review the information in the Event Log section, then make the desired changes.
The Event Log section lists all unacknowledged errors and warnings.
The Status column displays an icon indicating each item's status. Position the mouse
pointer over each icon to display a short message describing the status of the item.
To acknowledge an error or warning, click its name in the
Event column, then click
Acknowledged in the Message Detail Information dialog box that displays. You can also
click Advanced , select the check box next to the appropriate event, then click
Acknowledge (a check mark displays on the right side of the Date column to indicate that
the item has been acknowledged).
2d Review the information in the Upcoming Events section.
The Upcoming Events section lists events scheduled for the selected bundle. You can click
the calendar icon to display a calendar to view events for the desired date. You can also
use the arrows to view events for the previous or next day, week, or month. Click
Refresh
to see upcoming events for the selected bundle.
2e
Review the information in the Catalogs/Groups sections, then make the desired
configuration changes.
The
Catalogs/Groups sections list the catalogs and groups that contain the selected
bundle.
You can also use the following options: