Novation TWITCH, Руководство пользователя

Страница: 30 / 71

30
English
Loading Tracks
Once you have located the track you want to play in the Library you can load it to a deck using
TWITCH, the mouse or the keyboard.
Hardware
• Press LOAD A
17
to load to the left deck.
• Press LOAD B
18
to load to the right deck.
Keyboard
• Shift + ← to load to the left deck.
• Shift +
→
to load to the right deck.
Mouse
• Drag the track to either the left or right virtual deck
20
or overview area
24
.
tIp: Use the keyboard shortcuts Shift + Alt +
←
or Shift + Alt +
→
to unload a track from the
Virtual Deck.
Starting Playback
To begin playback press the
H B
(PLAY/PAUSE) button for that deck on TWITCH. Playback will
start from the beginning of the track. Pressing
H B
during playback will pause playback at the
current position. Pressing it again will resume playback from that position.
notE: When play from start is selected in the setup screen (in PLAYBACK > On Track Load),
the deck will try to skip any silence at the start of the track, and play from the start of the audio.
Adjusting Gain
The TRIM knob
22
located at the top of TWITCH adjusts the audio input gain, allowing you to
raise or lower the level of the track before you control the volume with the Channel Fader
19
during the mixing process. We recommend adjusting the gain so that the loudest sections
of the track cause the two top segments of the LED METERS
21
to light up without being
permanently lit. Setting TRIM for both decks in the same manner makes it easy to balance the
mix between them with the EQ and faders.
If you set the TRIM control too high, the limiter in ITCH will activate to try and prevent the audio
from clipping or distorting. When this occurs, the audio will start to be compressed and the
limiter indicator (at the top of the ITCH screen) will illuminate, warning you to decrease the TRIM
level.