Novation TWITCH Скачать руководство пользователя

Страница: 4 / 71

English

ENVIRONMENTAL DECLARATION

Compliance Information Statement: Declaration of Compliance procedure
Product Identification:

Novation TWITCH

Responsible party:

American Music and Sound

Address:

5304 Derry Avenue #C

Agoura Hills,

CA 91301

Telephone:

800-994-4984

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

For USA

To the User:

1. Do not modify this unit! This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifications not expressly approved by

Novation may void your authority, granted by the FCC, to use this product.

2. Important: This product satisfies FCC regulations when high quality shielded cables are

used to connect with other equipment. Failure to use high quality shielded cables or to

follow the installation instructions within this manual may cause magnetic interference with

appliances such as radios and televisions and void your FCC authorization to use this

product in the USA.

3. Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Содержание TWITCH








































































Результаты поиска

Содержание TWITCH

Отзывы:

Похожие инструкции для TWITCH

Бренды по названию

Популярные бренды

Novation TWITCH, Руководство пользователя

Результаты поиска

Содержание TWITCH

Отзывы:

Похожие инструкции для TWITCH

Бренды по названию

Популярные бренды