background image

DISCLAIMER

NS350

  

Operating Manual

27

Information in this document is provided solely in connection with NOVASAIL LTD 
products. NOVASAIL LTD reserves the right to make changes, corrections, 
modifications or improvements to this document and the products described herein at 
any time, without notice.

All NOVASAIL LTD products are sold pursuant to NOVASAIL LTD’s terms and 
conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the NOVASAIL 
LTD products described herein, and NOVASAIL LTD assumes no liability whatsoever 
relating to the choice, selection or use of the NOVASAIL LTD products described 
herein.

UNLESS OTHERWISE SET FORTH IN NOVASAIL LTD’S TERMS AND 
CONDITIONS OF SALE,  NOVASAIL LTD DISCLAIMS ANY EXPRESS OR IMPLIED 
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF NOVASAIL LTD 
PRODUCTS, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE (AND THEIR 
EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED NOVASAIL 
LTD REPRESENTATIVE, NOVASAIL LTD PRODUCTS ARE NOT RECOMMENDED, 
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, 
LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR 
SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL 
INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.  

Resale of NOVASAIL LTD products with provisions different 
from the statements and/or technical features set forth in this 
document shall immediately void any warranty granted by 
NOVASAIL LTD for the NOVASAIL LTD product or service 
described herein and shall not create or extend in any manner 
whatsoever, any liability of NOVASAIL LTD. 

Содержание NS350





























Отзывы: