NS350
Operating Manual
20
Push the select key when ready. The
NS350
will enter the calibration along the
axis. After a few seconds, 3 beeps will be emitted to notify the end of step 4.
•
Step 5 : ’5’ is now displayed on the lower screen. The
NS350
must be
oriented as follows :
Push the select key when ready. The
NS350
will enter the calibration along the
axis. After a few seconds, 3 beeps will be emitted to notify the end of step 5.
•
Step 6 : ’6’ is now displayed on the lower screen. The
NS350
must be
oriented as follows :
Advanced Operations
